TotalBoat Liquid Urethane Foam Kit 2 Lb Density Closed Cell for Flotation & Ins

Description

TotalBoat Liquid Urethane Foam Kit 2 Lb Density, Closed Cell for Flotation & Insulation (2 Quart Kit)
Marine-grade, 2-part liquid polyurethane expanding flotation foam with simple 1: 1 mix ratio by volume. Sets up quickly, and cures at room temperature.
Lightweight, 2 lb. density is ideal for adding buoyancy, insulating, soundproofing, and filling gaps or voids. For nonstructural applications only. Shelf life is 6 months from date of manufacture. Cures to a rigid, 94% closed-cell foam that resists water absorption, and is not affected by gas, oil, or solvents. Once fully cured, foam can be coated with polyester, epoxy, or vinyl ester resins, without melting. It can also be cut to desired shape easily.
Cures to a rigid, 94% closed-cell foam that resists water absorption, and is not affected by gas, oil, or solvents. Once fully cured, foam can be coated with polyester, epoxy, or vinyl ester resins, without melting. It can also be cut to desired shape easily.
Pourable polyurethane foam is very easy to use, expands rapidly, and hardens in place in about 5 minutes at 70-80°F, with minimal shrinkage. Foam can be poured in separate batches to build up multiple layers, forming strong bonds between layers.
Sizes: Available in 2-Quart and 2-Gallon Kit sizes; Yield: 2-Quart Kit – 2 cubic ft. , 2-Gallon Kit – 8 cubic ft. ; Flotation Range (admixed): 75 lbs. /qt. and 300 lbs. /gal. ; PROPER TEMPERATURE, TIMING, MIXING, and VENTING ARE CRITICAL TO ACHIEVING PROPER EXPANSION - Application Temperature: 75-80°F; Mixing Time: 25 seconds (mix thoroughly; there should be no visible swirls in the material); Pouring Time Before Foaming Starts: 45 seconds; Full Expansion: Approximately 7 minutes.
Total Boat 2-Part Polyurethane Flotation Foam 2 LB. Density formula is a fast-setting, pour-in-place, expanding liquid foam that cures to a rigid, lightweight material commonly used for adding buoyancy to keep your boat afloat in the event hull integrity is compromised. This U. S. Coast Guard-compliant foam has a closed-cell structure that enables it to resist water absorption for many years, making it ideal for filling pontoons and pouring into cavities beneath boat decks. It's also great for filling gaps, soundproofing, and providing thermal insulation in a variety of nonstructural marine & household applications. Total Boat pourable foam has a simple 1: 1 mix ratio that makes it very easy to use. Always have good ventilation, and use protective eyewear and gloves when mixing and pouring foam. Warm conditions of 75-80°F are extremely critical, as are accurate measuring, thorough mixing, and proper venting of the area where the foam is to be applied, because the foam expands tremendously by volume. Just mix one part resin and one part activator, and stir vigorously for approximately 25 seconds to mix completely. Pour immediately into the prepared void, and leave undisturbed until cured. The expanding foam will distribute itself evenly—even into irregularly shaped areas. The cured foam hardens into shape, with minimal shrinkage, and can be cut to shape easily. Once fully cured, any areas exposed to sunlight should be laminated or painted over with polyester, epoxy, or vinyl ester coatings. For best results filling larger areas, pour in multiple layers to allow a proper cure and maximum strength bonding between layer spare to Ever coat Marine Foam-It, FGCI Polyurethane Foam, US Composites Urethane Foam, & System Three Flotation Foam. Total Boat Flotation Foam provides excellent flotation and insulating properties. All Total Boat products are developed for boaters, by boaters. We know what works and what doesn't. 100% made in the USA.
ALL ELECTRONIC ITEMS ARE 120V UNLESS OTHERWISE STATED.  WE NOTE SERIAL NUMBERS FOR ELECTRONICS AND COMPUTER PARTS
BUYER ASSUMES ALL RISK/RESPONSIBILITY FOR ANY COMPATIBILTY ISSUES  ON INTERNATIONAL ORDERS
Shipping
We offer FREE shipping on all orders
We Only ship to the address provided at time of purchase
We use a selection of shipping services such as UPS, FedEx, USPS etc.
We only ship to the lower 48 states, NO APO/FPO addresses or PO Boxes allowed.
Cancel Requests are NOT Guaranteed to be met
We do NOT Ship to Freight Forwarders - we will CANCEL those orders
Return
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Payment
We accept payment by any of the following methods:
PayPal
We reserve the right to cancel any order
Feedback
Customer satisfaction is very important to us.
If you have any problem with your order, please contact us and we will do our best to make you satisfied.
Contact Us
If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays.