IET Labs HARS-L-X-9-0.001 9-Decade Laboratory Standard 20 ppm -->Calibrated<--

Description

Fully working and calibrated.
In addition, we will re-calibrate the unit at our accredited lab prior to shipping and include your company information on calibration certificate .
See stancal.com for our capabilities
You will receive a calibration certificate free of charge (5 value).  If Data is required, additional charge will apply.
Warranty:   30-day ROR
Accessories:  none
Compare to ,895 New price w/o cal
From Mfr. Specs':
High stability - as good as 5 ppm/yr
High accuracy - as good as 20 ppm
Resolution as good 1 mΩ with a fixed decade
Low temperature coefficient - as low as 3 ppm/°C
High performance silver-alloy contact switches
Hermetically sealed, low inductance resistors
No zero correction required
For increased accuracy, decades ≥ 1 Ω can be individually trimmed
The US Army's Resistance Standard
The HARS-LX series is the world's highest accuracy continuously variable decade resistor for the most exacting calibration and test applications.
The resistance substituter is a precision resistance source with excellent characteristics of accuracy, stability, temperature coefficient, and power coefficient. All these features serve to make it a laboratory resistance standard, exceeded in performance only by stand-alone standard resistors.
Hermetically sealed wirewound resistors are used for 1 Ω steps and over. These resistors are carefully conditioned under power and temperature in order to develop the best stability characteristics. Actual experience has shown them to exhibit a storage stability of better than 5 ppm/year, improving as they age. The low-resistance resistors are constructed with resistance wire with a minimum of copper resistance in series to limit temperature coefficient effects.
The resistance substituter has a fixed minimum resistance of 10 mΩ. This is implemented by mechanically limiting the 10 mΩ decade from going below the “1” position. In this manner, no zero resistance subtractions have to be made, and the accuracy given is for the absolute reading.
The HARS-LX series employs completely enclosed dust-tight very low contact resistance switches. They feature solid silver alloy contacts and quadruple-leaf silver alloy wipers which keep switch contact resistance to under 1 mΩ per decade, and more importantly, keep switch contact resistance reproducible, insuring repeatable instrument performance.
High quality gold plated tellurium copper binding posts minimize the thermal emf effects which would artificially reflect a change in dc resistance measurements. All other conductors within the instrument, as well as the solder employed, contain no metals or junctions that contribute to thermal emf problems.
The HARS-LX is designed to allow very convenient maintenance of calibration over time. Most decades can be calibrated without changing components or soldering resistors. The decades for the 100 Ω through 100 kΩ steps are calibrated with convenient trimmers. Trimming of the lower decades is also possible.
With a resolution as low as 1 mΩ and a maximum available resistance of over 12.2 MΩ, the HARS-LX Series may be employed for exacting precision measurement applications requiring high accuracy and stability. They can be used as components of dc and low frequency ac bridges, for calibration, as transfer standards, and as RTD simulators
All exports will be made in full compliance with all applicable U.S. government export regulations. No sales will be made directly or indirectly to any embargoed country, proscribed destination, denied party or restricted individual.