20 HP CNC Rotary Phase Converter XR15 Single to Three 3 208 220 230 240 V volt

Description

Visit Our Store
15kW/20HP ROTARY PHASE CONVERTER
TEMCo ID:
XR15
This 11 kW Phase Converter Works with:
Manual Machines (
Load Type Chart
)
Largest motor to start:
13.3 HP - Easy
10 HP - Medium
6.7 HP - Hard
Minimum motor group load:
15 HP Combined
CNC Machines (
Load Type Chart
)
Input power requirement no greater than:
8.0 kW
Resistive/Inductive (
Load Type Chart
)
Input power requirement no greater than:
14.9 kW
Common Loads
Easy Start/Run - Grinders
Medium Start/Run - Milling Machines
Hard Start/Run - Hydraulic Pumps
What's included?
1) TEMCo POWER-WAVE™ XR Rotary Phase Converter
2) Easy Hook-up instructions
3) Grounding crimp on terminals for connecting your ground wires to ground stud.
Warranty:
5 Years
Specifications
1 Phase Input Voltage
230V ±10%
1 Phase Input Frequency
60 Hz
3 Phase Output Voltage
= Input voltage + 5% on T2 (non-loaded)
3 Phase Output Frequency
60 hz
3 Phase Output Voltage Tolerance
± 5%
3 Phase Output Phase Angle
120°
Temperature Rating
40°C Ambient
Ambient Humidity
< 95% (non-condensing)
Maximum Altitude
3300 ft above sea level
Enclosure
NEMA 1
Recommended for all general electric loads?
Yes
Recommended for all CNC & Electriconic loads?
Yes
CNC & Electrical Loads
Continuous kW Output
8.0 kW
Continuous 3 Phase Amp Output
25 A
Resistive Electrical Loads
Continuous kW Output
14.9 kW
Continuous 3 Phase Amp Output
38.0 A
Inductive Electrical Loads
Continuous kW Output
10.4 kW
Continuous 3 Phase Amp Output
33.0 A
Output Configuration
Delta
Motor Loads
Max Easy Run or Start HP
13.3 HP
Max Medium Run or Start HP
10 HP
Max Hard Run or Start HP
6.7 HP
Max Group Load HP
15 HP
RLA* 1 Phase Input
Calculated based on 3 phase load x 1.732
Approx 1 Phase Idle Amps
10 A
MCA* 1 Phase
43 A
Min 1 Phase Fuse
50 A
MOP* 1 Phase
75 A
Recommended Wire Size
1 Phase
4 AWG
3 Phase
Based on load requirement
General Information
*RLA = Rated Load Amps
*MCA = Minimum Circuit Amps
*MOP = Maximum Overcurrent Protection
Shipping Dimensions
18" L x 22" W x 15" H
Recommended Accessories
Resilient Vibration Isolator
RVI504
Magnetic Starter
PESW-80V24AX-R41
data sheet
5 Year Warranty
11 Months From Now...
If it doesn't fit.
If it looks funny.
Or you just changed your mind.
Even if it's opened, used or broken, we will still accept your return and pay shipping both ways.
No restocking fee. Up to 1 year.
Rugged. Dependable. Power when you need it!
Wood working
Winery equipment
Metal Fabrication
Agriculture
Restaurant equipment
Oil field equipment
Free Shipping
To Lower 48 States
Features
Made with cast iron frames
for optimum rigidity and noise reduction.
High quality capacitors
and precision tuning provide maximum load capacity and efficiency.
Pre-punched conduit holes
allow for quick and easy installation.
Conduit holes are ideally located
for ease of cable management.
High quality GPO3 electrical grade fiberglass
is used for a rigid, insulated connections panel.
Solidly constructed hinged lid
with oversized connections compartment make installation easy. The lid is installed using high tensile corrosion resistant stainless steel rivets.
Precision starts with the basics.
Each
component is rigorously tested and inspected before we incorporate it into our design.
Heavy d
uty engraved nameplate
is made from anodized aluminum to keep the electrical specifications legible.
Easy screw down connections
allow for fast, solid terminations.
Our Resilient Vibration Isolators
(sold separately) are made from high quality neoprene rubber. A one stop solution for phase converter mounting, efficient cooling, noise reduction, and vibration control for prolonged bearing life.
Electrical grade aluminum lugs
come pre-installed with every unit. No need to find additional parts.
Time-saving connection points
are clearly marked for easy installation
for your single phase input, three phase output, and grounding connections.
We use high
quality UL listed wire
. 600V class, 90°C insulation, fine stranded copper wires allow for maximum performance.
No additional installation hardware required
for grounding stud and ring terminals.
Quality bearings
engineered to eliminate the cost of long term upkeep with components like sealed maintenance free bearings.
High precision.
At TEMCo, every bolt counts. We drive home quality with precision assembly systems.
Oversized structural lumber
with structurally interlocking packaging design prevents freight damage. Phase converters are securely mounted to study wood skids with high strength carriage bolts.
We use the
latest product development tools
, testing facilities & field equipment
analysis to produce truly unique power solutions.
100% Copper Windings.
Energy efficient, environmentally friendly.
Quiet Operation, 63db @ 10ft.
No louder than human conversation.
208-240V Operation.
Rugged, Heavy Duty
rotary design.
5 Year Warranty
from an American name. NON-GENERIC.
Manufacturing Phase Converters in Fremont, CA, USA since 1968.
We'll be here when you need us.
True Sine Wave
output.
Unitized Design
foreasy installation.
How to Select a Phase Converter
You can always use a TEMCo Rotary Phase Converter that supplies more power than you need now, but one that does not supply enough KW power output will not work.
Motor Loads
1)
What is the HP of the largest 3-phase motor you will need to start?
2)
Is it Easy, Medium or Hard to start
Determine your start load
.
3)
Find the appropriate column and motor HP. (Easy, Medium or Hard)
4)
Consider your Total Motor Group Load. (Total HP of motors that will be run, but not started at the same time)
5)
Choose the phase converter size that accommodates the power you will need by following the horizontal line to the right.
6)
Be sure you have a large enough single phase supply breaker. The single phase breaker should be two times the amps of your 3-phase motor/load up to the maximum recommended breaker size.
CNC Loads
CNC or computer numerically controlled equipment is generally voltage sensitive equipment requiring a voltage balance of ±5%. Some examples of this type of equipment are CNC mills, CNC lathes, UPS's, lasers, and CNC plasma cutters.
To size a converter for your CNC equipment, add your total CNC load amps, or kW and use the Maximum CNC Load column to select the appropriate model.
Resistive/Inductive Loads
Some examples of common resistive loads are heaters, EDM machines, kilns, and ovens. Examples of inductive type loads are power supplies, welders, and battery chargers.
To size a converter for your resistive/inductive equipment, add your total load amps, and use the Converter Maximum Output Amps column to select the appropriate model.
The XR Series is for use with CNC loads, motor loads, or inductive/resistive loads. The XR series comes only in a NEMA 1 enclosure. Voltage rating is 230v ±10%.
Recommended accessories
Resilient Vibration Isolators
RVI504
Magnetic Motor Starter
PESW-80V24AX-R41
Other Rotary Phase Converters
XR3
0
XR5
5
XR7
4
XR11
95
XR15
15
XR21
90
ROTARY PHASE CONVERTERS
Model Number
Price
Largest HP Motor Load
Maximum Total Motor Group HP Load
Max CNC Load
Max Resistive Load (A)
Max Single Phase Supply Breaker
Easy
Medium
Hard
Amps
kW
XR3
0
3.3
2.5
1.7
3.8
7
2.1
10
20
XR5
5
5
3.8
2.5
5.6
10
3
14
30
XR7
4
6.7
5
3.3
7.5
13
4
19
35
XR11
95
10
7.5
5
11.3
19
6.1
29
60
XR15
15
13.3
10
6.7
15
25
8
38
75
XR21
90
20
15
10
22.5
37
11.6
55
100
Static Phase Converters
XS0

XS1

XS3

XS5

XS8
5
XS12
5
STATIC PHASE CONVERTERS
Model Number
Price
Min/Max HP (Load)
Voltage
Hz
Max 1 Phase Amps
XS0

1/3 to 3/4
208-240
50/60
2.8
XS1

3/4 to 1 1/2
5.2
XS3

1 to 3
10
XS5

3 to 5
17
XS8
5
4 to 8
22
XS12
5
8 to 12
33.6
Shipping
Domestic
Lower 48 States:
FREE!
Local Pickup Available:
FREE!*
International
Calculated by location.
Orders are usually processed and shipped within 24 to 48 hours of receipt of your payment. Please provide us with a physical shipping address (failing to do so may delay your order). We may ship an order by a different courier at our discretion. If you need to receive an order within a guaranteed time frame, please contact us for rush options and expedited shipping.
Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Furthermore, we will not mark merchandise values below value or mark items as "Gifts".
*Local Pick Up
is available at our Fremont CA location, Monday through Friday 9:00 a.m. to 5:00 p.m. Please contact us ahead to ensure that your item is in stock at our location before pick-up.
** International Buyers, Please Note:
If shipping for your country is not listed,
contact us
for details.
Payment & Returns
Payment
TEMCo accepts the following payment methods: PayPal, Visa, MasterCard, AMEX, Discover.
We charge 9.75% sales tax for all orders shipping within California. Tax exemption is available if we are provided with a valid California resale certificate.
Returns
TEMCo allows for the return of products for 1 year from the date of purchase. Even if it's opened, broken, or used, we will still accept your return and pay shipping both ways.
We will replace the item with an identical item or issue a refund for the value of the item.
Customer feedback
We strive to provide 5-star service. Shop with confidence!
100% Positive reviews
We want nothing more for our buyers than to be 100% happy with their purchase. We strive to earn a 5-star rating from every purchase. When you receive your purchase, please take a moment to leave us a positive feedback. If there was something unsatisfactory about your purchase, please
contact us
before leaving feedback and we'll do what's necessary to remedy the problem and ensure your satisfaction!
When your order ships from our warehouse, we will automatically leave you positive feedback.
"I have always been delighted with the service from TEMCo."
Your customer service, which is seldom needed, is wonderful, the staff knowledgeable and courteous. The shipping has been quite fast, which make my life easier... So, thank you, for the good experiences with the company!
Rick C
"I have ordered from TEMCo several times over the last 2 years and have always found the process to be simple and quick."
Making the order takes only a few moments, the product is always high quality and the shipping fast.
Glen B
"Thank you for a very satisfying and honest transaction."
It is really great to deal with a company that does exactly what they advertise. I can truly say I would recommend your company to anyone interested in the equipment you sell.
Paul Gilley
"The service was awesome."
I  had many tech questions, and they spent about 30 mins on the phone answering all of them for me. It is not to often to find service like that!!!!! I am so happy and will definitly purchase from them again. A+++++
MRZ Contracting
Still not sure about us?
Check us out on the
Better Business Bureau
and
Reseller Ratings
, or look at our
eBay seller ratings
with a perfect score in all categories.
View our other products
Battery Link Cables
Motor Capacitors
Electric Motors
Lighting
magnet wire
motor starters
Phase converters
raw material
resistance wire
ring terminals
SO Cord
Solar Tools & Hardware
switches & Relays
tools
valves
drives
welding cable
Shrink
tubing
About TEMCo
Since 1968, TEMCo has become a trusted name in industrial power products.
TEMCo products meet the demands of tough industrial applications with dependability and quality. We are proud to be an accredited member of the Better Business Bureau Online Reliability Program. Some of our customers include:
TEMCo Industrial
Sales, Manufacturing & Distribution
48621 Warm Springs Blvd
Fremont, CA 94539
Contact us
Send us a Message