1PCS new For MOXA Isolated Industrial Converter TCC-100I RS232 to RS422 485

Description

Document
Store home
All Items
About us
Feedback
Contact Us
Store Categories
Other
PLC and module
sensor switch
Motor and encoder
Relay and contactor
Proximity switch
Photoelectric switch
Pictures of Item
Description
IntroductionIntroductionAt present, many important devices in the industrial environment still use the RS-232 interface interface design. However, RS-232 is a point-to-point interface, which limits the transmission distance between the device and the computer to only 15M. To overcome this limitation, many users use RS-232 to RS-422 / 485 converters to connect RS-232 devices to industrial RS-422 or RS-485 networks, transmitting data over a distance of more than 1.2 km.
TCC-100 / 100I is an isolated RS-232 and RS-422 / 485 bi-directional converter. It is a product specially designed for industrial-grade interface conversion. It is designed for users who extend RS-232 transmission distance and improve network performance. Strict industrial application design features, including DIN-rail standard rail mounting, terminal block wiring, power supply through external terminal blocks, and system optical isolation protection, these make the TCC-100 / 100I more suitable for industrial environments. In short, your RS-232 device can be easily connected to industrial RS-422 / 485 networks without any hardware or software changes.
Automatic Data Flow Control (ADDC®)ADDC® (Automatic Data Flow Control)-MOXA patented, uses intelligent hardware to solve the problem of RS-485 data flow control. The RS-485 standard usually uses half-duplex communication and handshake signals. For example, RTS / CTS is used to control the direction of data flow, while TCC-100 / 100I converter uses built-in ADDC® technology to solve the problem of data flow through hardware technology, automatically determine and control the direction of data transmission, and no longer needs a handshake signal.
Isolation protectionMOXA photoelectric isolation technology uses two photoelectric sheets to create a gap in each group of electrical signals. One photoelectric sheet changes the electrical signal into an optical signal, passes through the fine slit, and then the other photoelectric sheet signal is restored to a signal. In this way, the two sides of the circuit can be fully isolated to prevent damage, and the other side's protection is achieved by power protection in the signal.
Automatic rate detectionThe hardware of TCC-100 / 100I has the function of automatically detecting the serial port signal rate, which is very convenient for users. Even when the device speed changes, data can still be transmitted through RS-232 and RS-422 / 485 converters without being affected.
RTS / CTS RS-422 handshake informationThe TCC-100 / 100I provides an RS-422 handshake signal. The RTS / CTS handshake signal can effectively reduce the chance of data transmission errors.
Features-RS-232 and RS-422 conversion with RTS / CTS signal-RS-232 and 2 / 4-wire RS-485 conversion-Both RS-422 / 485 signal and power terminals have 2 KV (TCC-100I) photoelectric isolation protection-DIN-Rail standard rail mounting and panel mounting-Screw-fastened terminal blocks for easy RS-422 / 485 wiring-PWR, LED monitor Tx and Rx status-15KV ESD protection-Operating temperature from -20 ° C to 60 ° C
communicationBaud rate: 50 bps ~ 230.4 KbpsSerial port protection: 15 KV ESD (all signals)Photoelectric isolation: 2 KV (TCC-100I)working environmentWorking temperature: -20 ~ 60 ° CStorage temperature: -20 ~ 85 ° COperating humidity: 5 ~ 90% RHpower supplyInput voltage: 12-30 VDCReverse protection: provide V + and V- reverse power protectionOvercurrent protection: signal short circuit protectionPower consumption: TCC-100: 286 mA @ 12V (3.4w)TCC-100I: 390mA @ 12V (4.68w)
Copyright © 2018 |
lapindustry